Contents
1. Technology Parameter
2. Earphone Charging
3. Basic Operation
4. Eraphone Pairing
5. Pairing Problems
6. Using Earphone
Paremeter
Technology standard: Bluetooth CSR V2.0+EDR
Transmiter power: CLASS II
Wireless frequency: 2.4 GHZ-2.480 GHZ
Sensitive: <-75dBM
Transmiter distance: 10M
Charger: INPUT: 100-240AVC
OUTPUT: 5VDC
Charging battery: 80mAH
Charging time: 2-3 hours
Talking time: 5 hours
Standby time: 130 hours
Dimension: 33*16*9
Charging the Earphone
When you use the earphone for first time please charge fully (about 2 hours) till the red light turns off.
The earphone include rechargeable Li-polymer battery, please don´t take it out in order not to spoilt the earphone.
Operation steps:
1. Plug the charger into the charging port.
2. As the picture show, when battery is charging the red light turns on.
3. When the battery is closing to fully charged, the red light turns off.
The rechargeable Li-polymer battery can at most keep 5 hours talking time, 130 hours standby time. But, they are may different according to different mobiles, accessories, setup, using ways and surroundings. It will tone when low battery, and flash red.
NOTICE
Don´t change the battery.
Don´t use the bluetooth headset when it is been charging.
Don´t try to use other charger en order not to spoilt the earphone.
Suggestion
When low battery, you will hear a tone every 2 seconds and the LED indicator light will flash. It will happen before 5 minutes when complete no power. It´s unnecessory to wait till no power, you can charge at any time. But when the earphone is no power, please charge at least one time to keep it´s good status.
Basic Information
Turn on and turn off
Turn on: In the status of closing, press the function button for 4 seconds.
Turn off: In the status of opening, pree the funtion button for 4 seconds.
Indicator Light:
Earphone´s status Indicator´s status
Charging Steady red
Turn on Blue flash
Pairing Red and blue flash
Low battery Slow red flash
Closing Red flash 1 second
Pairing
Before using the earphone, please set pairing with other bluetooth (mobile).
As the follow steps:
Prepare Pairing
Between the mobile and the earphone in the range of 1M, and ensure the earphone is closing.
Enter Pairing
Press the function button till red and blue flash, the earphone enter pairing automatically.
Use the mobile´s menu to search bluetooth audio setup, when the mobile´s screen show "H50*", choose it.
Input password
Input password "0000". If pairing successful, blue light flash repeated every 6 seconds. If fail, the red and blue flash.
Pairing finished
Press "back" button to main menu, if enter pairing, the bluetooth mark will appear on the screen. You can answer incoming call by the bluetooth headset.
Pairing problem
Pairing Successful
If pairing successful, ablue light will flash repeated every6 seconds.
Pairing Fail
If pairing unsuccessful, red and blue keep flash or the mobile mention you didn´t search the setup. You need to pairing again follow the above ways.
Using the Earphone
Talking Functions
Answer a call: Tap the function button, answer a call.
End a call: Tap the function button, finish a call.
Rejet a call: Tap the hold the function button for 2 seconds, refuse a call.
Turn Volume
Tap volume up button increase volume.
Tap volume down button to decrease volume.
Redial
When the mobilephone and the headset are connecting, press the function button for 2 times untill you hear a voice prompt.
Voice dial
Press the function button, speak the number after a tone, the mobile will link automatically.
PS:
The mobilephone must support voice dial function.
Summary
Items Status Operation
Turn on Closing Press function button 4 seconds
Turn off Opening Press function button 4 seconds
Pairing Closing Press and hold function button 6 seconds
Answer a call Ringing Tap function button
End a call Talking Tap function button
Reject a call Ringing Tap function button 2 seconds
Redial Standby Press function button 1 time
Voice dial Standby Quickly Press function button 2 times
